All-Terrain Lawn Mower Association
February 12, 2012, 12:05:33 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Welcome to the All-Terrain Lawnmower Association forum!
 
   Home   Help Search Calendar Staff List Login Register  
All-Terrain Lawn Mower Association > All-Terrain Mowchine Setup > Research & Development > Topic: Rear wheels on front spindles.
Pages: [1]   Go Down
« previous next »
  Send this topic  |  Print  
Author Topic: Rear wheels on front spindles.  (Read 1322 times)
0 Members and 1 Guest are viewing this topic.
Ncredleg
Newbie!
*

e-Rep: 0
Offline Offline

Gender: Male
Posts: 14


View Profile
« on: April 15, 2010, 01:39:50 PM »
To correct the issue of the slotted rear hubs  you could use JB weld to fill in the slot after cleaning the area thoroughly.I have used JB weld on cracked IC blocks and it holds suprisingly well.I would use a triangle file to widen the base so that it would create a key within that slot so that it was bigger at the base than the open side.
Report to moderator   Logged
Chris
Administrator
*

e-Rep: 4
Offline Offline

Gender: Male
Posts: 979



View Profile WWW
« Reply #1 on: April 15, 2010, 02:52:15 PM »
The only problem with that is there's no bushings, bearings, or grease zurks on rear wheels. The truly mowtivated could easily alleviate that problem though!
Report to moderator   Logged

Just because you move up in a class doesn't mean that you'll "loose" the "race", it just means that you're building a better, more capable machine.
Ncredleg
Newbie!
*

e-Rep: 0
Offline Offline

Gender: Male
Posts: 14


View Profile
« Reply #2 on: April 16, 2010, 07:22:13 AM »
Yep .Zerks are mandatory.
Report to moderator   Logged
Pages: [1]   Go Up
  Send this topic  |  Print  
All-Terrain Lawn Mower Association > All-Terrain Mowchine Setup > Research & Development > Topic: Rear wheels on front spindles.
 « previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC
Enotify by CreateAForum.com 		Valid XHTML 1.0! Valid CSS!
Page created in 0.056 seconds with 21 queries.