All-Terrain Lawn Mower Association
February 12, 2012, 10:44:05 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you have any questions, concerns, suggestions  - PM someone on the administration team.
 
   Home   Help Search Calendar Staff List Login Register  
All-Terrain Lawn Mower Association > All-Terrain Mowchine Setup > Research & Development > Topic: Gearing Chart
Pages: [1]   Go Down
« previous next »
  Send this topic  |  Print  
Author Topic: Gearing Chart  (Read 741 times)
0 Members and 1 Guest are viewing this topic.
Chris
Administrator
*

e-Rep: 4
Offline Offline

Gender: Male
Posts: 979



View Profile WWW
« on: October 15, 2007, 06:26:56 AM »
For those of you that didn't see this post over on HeyMow...

Quote from: cycloneracer
Here is a gearing chart that I found that has been very helpful.  It is from 9 tooth to 23 tooth. and 9 tooth to 60 tooth.   This is the only one that I have found that goes that small on the rear sprocket.
Hope this helps!  Feel free to post other gear charts in this topic.

http://www.4strokes.com/tech/gear_ratio_chart.pdf

Paul
Report to moderator   Logged

Just because you move up in a class doesn't mean that you'll "loose" the "race", it just means that you're building a better, more capable machine.
Pages: [1]   Go Up
  Send this topic  |  Print  
All-Terrain Lawn Mower Association > All-Terrain Mowchine Setup > Research & Development > Topic: Gearing Chart
 « previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC
Enotify by CreateAForum.com 		Valid XHTML 1.0! Valid CSS!
Page created in 0.084 seconds with 22 queries.